- You may now log in.
Custom 6" Action Figure
Price from (piece): $ 109.00
You Save: $ 10.00
If you are afro-american or of another ethnicity, please be aware of the skin color shown in each figure photos is fixed like the clothing. Your best option is to buy your custom head from us and use it to replace the head from a suitably skin-colored figure you can buy elsewhere online (you can email us for advice).
We will match the theme of each outfit, though exact designs may vary.
The 6-inch Custom all-vinyl Action Figure comes with a personalized head and a range of hair options.
Depending on the selected figure, we typically allow for 9, 14 or 24 business days from receipt of the final photos to shipping.
Your complete 6-inch action figure will vary in size depending on the selected figure, typically between 5-9" (13cm to 20cm) in 1:14 to 1:9 scale. The all-vinyl figure comes with a head created out of a resin composite in full 24-bit color.
Typically, the bigger the head size, the better detail we can achieve. Compared to our 1:6 scale action figure head for 12-inch figurines, more of the finner details visible in the 3D Face will be lost in the smaller heads. A 6-inch figure is all-vinyl which means it is made of plastic only, including outfits and accessories. Coloring are painted. On the other hand, 12-inch figures have plastic bodies but the clothing is primarily made of fabric and is typically removable.
Some Assembly Required. To make it easier to change clothing, swap figures, orient the head to your liking, avoid breakage during shipping and trademark restrictions, the custom head is loose and can be attached with the provided glue/putties.
First the original plastic head must be removed from the 5-8 inch action figure. In some cases, the head can be removed directly by pulling firmly on the head. However, we recommend first putting your figurine's head under very hot tap water for a minute and then use a towel to pull off the head with a firm pull. The original plastic head can be snapped back on to return the figurine to its original state.
To fix the head to the figurine's neck-post, first knead the provided Putty/Blue-Tak into a ball of softer putty. Insert it inside the head so that most of the head is filled. Then press it down on the neck-post. The head should now fit firmly it place. It can still be rotated to make the figurine look sideways.